Do acoustic panels work in your room?
Written by Matt W on 17th Nov 2026.
9mm sound-absorbing felt absorbs part of the sound that reaches it.
Each panel measures 240cm high x 60cm wide x 2.1cm deep.
The included fixing kit allows suitable wall or ceiling mounting.
Products and prices checked 17 November 2026.
Yes, acoustic panels work by absorbing some reflected sound inside a room. They reduce echo and help speech sound clearer. Monster panels have 9mm sound-absorbing felt behind MDF slats, with 13mm gaps that expose the felt. Each panel measures 240cm high x 60cm wide x 2.1cm deep. They do not soundproof walls or stop noise passing between homes.
Key takeaways
- The 9mm felt backing absorbs sound, while 13mm gaps expose it between the slats.
- Each panel covers about 1.44m2 and weighs about 11kg.
- Two panels make a 1.2m run, with the slat rhythm continuing across the join.
- No absorption rating, NRC or decibel figure is stated for this range.
- These panels reduce room echo. They do not stop noise from neighbours.
Buyer's note from Matt W: I start with the problem you want to solve: echo inside your room or noise through a wall. I would compare the full wall run against pack coverage before choosing a finish. I also check the surface and fixing method, because each panel weighs about 11kg. I cannot give you a measured sound reduction without a stated absorption rating.
- Matt W, Acoustic Panel Stores
Do acoustic panels work?
Yes, acoustic panels reduce echo by absorbing part of the sound reflected around a room. Hard surfaces such as plaster, glass and bare floors reflect sound back into the space. Those reflections build up as echo and reverberation.
Felt absorbs part of the sound that reaches it, so less sound returns to the room. The result is a calmer sound and clearer speech inside that space.
The amount of absorbing material matters. More absorbing area generally means a bigger effect, although this range has no stated absorption rating. We cannot attach a measured result to a single panel or promise a particular reduction for your room.
How do acoustic slat panels reduce echo?
Acoustic slat panels reduce echo through the sound-absorbing felt behind their slats. The Monster range has MDF slats with a wood-effect veneer over 9mm flame-retardant sound-absorbing felt.
The 13mm gaps keep the pattern even and expose the felt to sound. The felt is the absorbing material behind the decorative surface.
Each panel is 240cm high x 60cm wide x 2.1cm deep, with about 1.44m2 coverage. The listing also uses the wording "27mm MDF slat". Check the listed measurements before ordering where the panel depth affects sockets, corners or skirting.
A single panel lets you cover a narrower section than a pack. More absorbing area generally produces a bigger effect, so appearance alone should not decide your coverage.
Matt's pick: Monster 2-Pack - Oak
Best for: A 1.2m-wide feature section behind a sofa or desk.
Why we rate it: Two panels cover about 2.88m2. The slat rhythm continues across the join when the panels sit side by side.
Price: £155
Do acoustic panels soundproof a room?
No, acoustic panels do not soundproof a room. Absorption changes how sound behaves inside the space. Soundproofing concerns sound passing through walls or floors into another space.
Stopping that transmission needs heavy, airtight construction. These panels do not provide that construction when fixed to a wall.
The distinction matters before you spend money. If voices sound echoey within your home office, absorption addresses that problem. If the problem is noise arriving through a shared wall, these panels will not stop it.
For acoustic panels vs soundproofing, start with where the unwanted sound travels. Choose panels for reflected sound within your room. Do not buy them as a barrier between your home and your neighbours.
Watch out: echo reduction is not soundproofing. These panels reduce echo inside a room. They will not stop noise from neighbours. Heavy, airtight construction is needed to limit sound passing through walls or floors.
Where do acoustic panels work best?
Acoustic panels work best where their absorbing surface can intercept reflected sound. A desk wall, TV wall or large bare wall is a sensible starting point.
For a home office, we recommend considering the wall behind your desk. Clearer speech inside the room is the relevant benefit here. Beside a TV is another sensible position where sound first reflects.
In open-plan rooms, compare the proposed panel area with the amount of bare, reflective surface. A small decorative section has less absorbing area than a longer panel run. More absorbing area generally means a bigger effect.
The included fixing kit allows direct mounting to a suitable wall or ceiling. Each panel weighs about 11kg, so check the surface and fixing method before starting. Ceiling mounting needs the same attention to suitability.
Are acoustic slat panels worth it?
Acoustic slat panels are worth considering for a decorative wall finish with some sound absorption. Their value depends on whether you want both parts of that purchase.
The MDF slats and wood-effect veneer provide the visible finish. The exposed felt absorbs part of the sound that reaches it.
If you need a measured acoustic performance target, this listing does not provide the evidence for that choice. No absorption rating, NRC or decibel figure is stated. We cannot rank these finishes by acoustic performance or promise a measured room result.
Compare pack coverage and price against the section you want to cover. The table separates stated pack weights from the approximate weight of each panel.
| Product | Panels | Coverage (m2) | Laid width (cm) | Weight (kg) | Price |
|---|---|---|---|---|---|
| Anthracite Grey single | 1 | About 1.44 | 60 | About 11 | £98 |
| Light Walnut single | 1 | About 1.44 | 60 | About 11 | £103 |
| Anthracite Grey 2-pack | 2 | About 2.88 | 120 | 22 | £155 |
| Oak 2-pack, Matt's pick | 2 | About 2.88 | 120 | About 11 per panel | £155 |
| Dark Walnut 2-pack | 2 | About 2.88 | 120 | About 11 per panel | £145 |
| Light Walnut 3-pack | 3 | About 4.32 | 180 | About 11 per panel | £223 |
How do you choose a finish and pack size?
Choose the finish you want, then match the pack size to your measured wall run. Anthracite Grey and Light Walnut are available as single panels, 2-packs and 3-packs. Oak and Dark Walnut are available as 2-packs.
Compare oak panels with walnut panels for the decorative finish. Colour choice does not replace the need to plan enough absorbing area.
Two panels side by side make a 1.2m run, with the slat rhythm continuing across the join. A 3-pack has a 180cm laid width and covers about 4.32m2. The Anthracite Grey 3-pack weighs 33kg.
Measure the whole run before trimming around sockets, corners or skirting. Check the surface and fixing method before starting. Delivery is free and takes 3-5 working days.
"This range gives us decorative wood-effect finishes with sound-absorbing felt behind the slats. We carry single panels and packs so you can match the available finishes to your measured wall run."
- Matt W, Acoustic Panel Stores
Frequently asked questions
Do acoustic panels stop noise from neighbours?
No, these panels do not stop noise passing through walls or floors. They absorb part of the sound inside your room. Soundproofing needs heavy, airtight construction.
Do acoustic slat panels have an absorption rating?
No absorption rating, NRC or decibel figure is stated for this range. That means we cannot give a measured reduction for your room.
Can these panels go on a ceiling?
Yes, the included fixing kit allows mounting to a suitable ceiling. Each panel weighs about 11kg. Check the surface and fixing method before starting.
How much wall does a 2-pack cover?
A 2-pack covers about 2.88m2 across a 120cm laid width. Two panels side by side make a 1.2m run. The slat rhythm continues across the join.
What are the slats made from?
The slats are MDF with a wood-effect veneer. Behind them is 9mm flame-retardant sound-absorbing felt. The listing gives 13mm gaps between slats.
How long does delivery take?
Delivery is free and takes 3-5 working days. No warranty term is stated in the listing. Check this before ordering if a stated term matters to your choice.
Related articles
Sources checked
- Acoustic Panel Stores product listings for Monster acoustic slat wall panels, checked 17 November 2026.